Bearing constant pressure PE outrigger pad

2020-03-25  From: Qingdao ZS Development Co., Ltd. Browsing times:520

Bearing constant pressure PE outrigger pad

outrigger pad

The performance of polyethylene leg plate is a kind of continuous bending of ultra high molecular weight polyethylene engineering plastics,

The support plate is mainly used in the support of the construction machinery.

The support plate has high strength and rigidity, which can reduce the deformation of the supporting plate body,

For the construction machinery to provide more stable support. Greatly reduce the cost of use and improve the quality of work.

The supporting leg pad is composed of two parts of a plate type pad body and a portable rope.

The plate pad body is made of UHMW/HDPE polymer composite material.

The four corners of the backing plate support 60mm bearing 15-18 tons /cm2, can be used in harsh environments,

The use of rather than bending bending. The portable rope is made of nylon material,

In order to carry and arrange.

outrigger pad


[product] PE polyethylene leg support plate is lighter than the traditional metal support plate,At the same time, chemical corrosion resistance, good stability, the use of overload bending rather than fracture, with high strength and stiffness,For large construction machinery to provide more stable support. Our company's production of leg pads good quality, excellent price.[product features] is mainly used in the pad under the support of the pump legs, play a supporting role.[product material] UHMW-PE material.

outrigger pad

Leg plate

The support plate is mainly used in the support of the construction machinery.

The support plate has high strength and rigidity, which can reduce the deformation of the supporting plate body,

For the construction machinery to provide more stable support. Greatly reduce the cost of use and improve the quality of work.

The supporting leg pad is composed of two parts of a plate type pad body and a portable rope.

The plate pad body is made of UHMW/HDPE polymer composite material.

PE high molecular synthetic material backing plate four angle support 60mm pressure 15-18 tons above /cm,

The utility model can be used normally in the bad environment. The rope is made of nylon,

The end part of the portable rope is embedded in the pad body for carrying and arranging.
Properties of ultra-high molecular weight polyethylene wear resistant and pressure resistant leg support:
1, the wear resistance of plastic crown, 4 times higher than nylon and PTFE, carbon steel is higher than the 6 times;
2, the impact strength of plastic in the first column, 2 times PC, 5 times ABS, and at the temperature of liquid nitrogen (196 C)
Maintain high toughness;
3, self lubricity and PTFE, friction coefficient is only 0.07 - 0.11;
4, the impact energy absorption value in all plastic for high value, good effect of sound insulation;
5, high chemical stability, in a certain range of temperature and concentration of corrosive medium and the role of organic media;
6, anti adhesive ability is very strong, only inferior to ptfe;
7, completely health non-toxic, can be used for contact with food and medicine;
8, superior corrosion resistance, low friction coefficient, small proportion, good resistance to high energy radiation performance.
Ultra high molecular weight polyethylene chemically stable at a certain temperature,
Concentration range can be acid, alkali, salt and other corrosive media and organic solvent corrosion;
9, ultra high molecular weight polyethylene tasteless, non-toxic, odorless, non-toxic
It has physiological cycle and physiological adaptability
10, non adhesion;
11. When the molecular weight of HDPE is more than 500 thousand, the brittleness temperature drops to 140
Ultra high molecular weight polyethylene can even under the action of liquid nitrogen, the use of temperature of 269 degrees below,
There is still a certain mechanical strength.


Keywords: outrigger pad   PE outrigger pad